﻿1
00:00:05,000 --> 00:00:11,000
Every night, all year round, the ESO Very Large Telescope, or VLT, 

2
00:00:11,000 --> 00:00:16,000
opens its four giant eyes to scrutinise the beautiful southern skies. 

3
00:00:16,000 --> 00:00:23,000
 Each eye is a huge mirror, 8.2 metres in diameter that gathers the light of the night sky, 

4
00:00:23,000 --> 00:00:29,000
and reflects it into optical systems that form ultra-sharp images of the Universe.

5
00:00:29,000 --> 00:00:35,000
But keeping the VLT´s eyes clear requires each mirror to be cleaned and recoated occasionally,

6
00:00:35,000 --> 00:00:38,000
a delicate and complex procedure. 

7
00:00:42,000 --> 00:00:44,000
This is the ESOcast! 

8
00:00:44,000 --> 00:00:49,000
Cutting-edge science and life behind the scenes of ESO, the European Southern Observatory. 

9
00:00:49,000 --> 00:00:55,000
Exploring the ultimate frontier with our host Dr J, a.k.a. Dr Joe Liske.

10
00:00:58,000 --> 00:01:00,000
Hello and welcome to the ESOcast. 

11
00:01:00,000 --> 00:01:05,000
In this episode, we’re going to follow the recoating of one of the VLT’s primary mirrors. 

12
00:01:05,000 --> 00:01:10,000
Although this happens quite regularly, this is far from being a routine procedure. 

13
00:01:10,000 --> 00:01:14,000
Under the open sky, dust collects on the surface of the mirror. 

14
00:01:14,000 --> 00:01:17,000
And although this layer of dust is very thin,

15
00:01:17,000 --> 00:01:20,000
it nevertheless degrades the quality of the astronomical observations. 

16
00:01:20,000 --> 00:01:23,000
And so the mirror must be cleaned regularly. 

17
00:01:23,000 --> 00:01:26,000
In fact, it must not only be cleaned, it must be recoated,

18
00:01:26,000 --> 00:01:31,000
meaning that its thin layer of reflective aluminium must be replaced. 

19
00:01:31,000 --> 00:01:35,000
The ESO technicians and engineers must work both quickly and carefully

20
00:01:35,000 --> 00:01:39,000
to complete this operation on the fragile 17‑cm‑thick mirror 

21
00:01:39,000 --> 00:01:42,000
in order to limit the telescope’s downtime.

22
00:01:45,000 --> 00:01:50,000
First, the telescope must be prepared so that the mirror and its cell can be taken out. 

23
00:01:50,000 --> 00:01:54,000
The team is removing an instrument attached to the mirror cell. 

24
00:01:57,000 --> 00:02:01,000
Outside, a custom-built carriage is moved into position. 

25
00:02:01,000 --> 00:02:05,000
This carriage will support the mirror and the cell, cushioning the load during transport. 

26
00:02:06,000 --> 00:02:09,000
A dedicated platform lifts the carriage to the mirror deck. 

27
00:02:09,000 --> 00:02:13,000
When it reaches the deck, the carriage slides into the building

28
00:02:13,000 --> 00:02:18,000
on a stream of pressurised air, ending up just below the mirror and the cell. 

29
00:02:18,000 --> 00:02:21,000
The carriage is raised to receive the cell and mirror.

30
00:02:23,000 --> 00:02:27,000
Once the cell is safely on the carriage it can be disconnected from the rest of the telescope. 

31
00:02:27,000 --> 00:02:31,000
All the bolts are released and the data and control cables are removed. 

32
00:02:31,000 --> 00:02:35,000
Now this is always a pretty tense moment and the team is working very carefully

33
00:02:35,000 --> 00:02:38,000
to make sure that they don’t damage the fragile mirror. 

34
00:02:38,000 --> 00:02:43,000
After all, there is no spare at ESO, and making a new one would take years.

35
00:02:45,000 --> 00:02:48,000
The surface of the mirror is extremely vulnerable.

36
00:02:48,000 --> 00:02:51,000
It must be covered before it is taken out of the building

37
00:02:51,000 --> 00:02:59,000
The cover not only protects the mirror but also prevents it from concentrating sunlight and burning anything in its path.

38
00:03:08,000 --> 00:03:12,000
Before the mirror can be covered completely, a smaller mirror must be dismounted. 

39
00:03:12,000 --> 00:03:17,000
This mirror sends the light gathered by the main mirror to different instruments at the telescope. 

40
00:03:17,000 --> 00:03:22,000
During the coming days, the optical engineers will inspect and clean this mirror as well. 

41
00:03:24,000 --> 00:03:28,000
Eventually, the larger mirror is completely covered. 

42
00:03:29,000 --> 00:03:33,000
The carriage slowly slides out of the telescope building,

43
00:03:33,000 --> 00:03:38,000
supporting the full weight of the mirror and the cell, a substantial 50 tons. 

44
00:03:38,000 --> 00:03:43,000
Once again, the lifting platform is used, carefully lowering the carriage to ground level. 

45
00:03:46,000 --> 00:03:52,000
A truck brings in the hydraulic trailer. The trailer is carefully positioned to take the precious load. 

46
00:03:56,000 --> 00:04:05,000
The load is secured with chains to prevent it from sliding off the trailer in case of an earthquake or a sudden stop.

47
00:04:11,000 --> 00:04:14,000
The team is now ready to start the trip down the mountain to the recoating plant. 

48
00:04:14,000 --> 00:04:18,000
This journey is a crucial stage in the whole process. 

49
00:04:18,000 --> 00:04:21,000
Before the mirror is brought out, the weather must be checked thoroughly:

50
00:04:21,000 --> 00:04:24,000
high winds must be avoided at all costs during the transit

51
00:04:24,000 --> 00:04:28,000
because any flapping of the lightweight mirror cover might scratch the mirror.

52
00:04:28,000 --> 00:04:35,000
Furthermore, the truck driver is supposed to never apply the brakes, because an abrupt halt might be dangerous for the mirror. 

53
00:04:35,000 --> 00:04:39,000
And so the truck moves along at a leisurely 5 km/h.

54
00:04:39,000 --> 00:04:44,000
But even at this walking pace, it eventually arrives safely at the mirror maintenance building. 

55
00:04:52,000 --> 00:04:58,000
The first task at the mirror maintenance building is to remove the mirror from the carriage and its cell. 

56
00:04:58,000 --> 00:05:01,000
The carriage is positioned under a custom-made handling tool.

57
00:05:02,000 --> 00:05:08,000
Brackets connect the mirror and the cell. Engineers have to release each one manually. 

58
00:05:08,000 --> 00:05:14,000
This may sound like a routine job, but, with the sensitive mirror surface only centimetres away,

59
00:05:14,000 --> 00:05:18,000
it requires the team’s undivided attention. 

60
00:05:18,000 --> 00:05:24,000
Forgetting to take off even one bracket could damage the mirror severely during the lifting operation. 

61
00:05:24,000 --> 00:05:30,000
The team is only ready to lift the mirror off its cell after a triple check of every bracket. 

62
00:05:32,000 --> 00:05:39,000
Hooks are lowered to bear against the back of the mirror and the handling tool lifts the mirror up and off the cell. 

63
00:05:40,000 --> 00:05:42,000
Now the cell can be removed.

64
00:05:51,000 --> 00:05:57,000
Subsequently, the mirror is lowered again to allow some work to be carried out on its back surface.

65
00:05:59,000 --> 00:06:07,000
Before the optical engineers start work on recoating the optical side of the mirror they must clean its back surface by hand. 

66
00:06:07,000 --> 00:06:15,000
This cleaning is essential as it removes oils, particles and other contaminants that could damage the mirror in the vacuum chamber. 

67
00:06:19,000 --> 00:06:26,000
Afterwards the bottom half of the vacuum chamber is brought in and the mirror is carefully lowered into it. 

68
00:06:29,000 --> 00:06:32,000
The mirror is next taken into a cleanroom.

69
00:06:41,000 --> 00:06:46,000
The first action in the cleanroom is to treat any badly polluted areas on the mirror manually. 

70
00:06:46,000 --> 00:06:51,000
This requires a steady and skillful hand in order to avoid scratching the surface. 

71
00:06:51,000 --> 00:06:57,000
The point of doing this is to remove any particles that might not be easily flushed away during the subsequent washing. 

72
00:06:57,000 --> 00:07:02,000
Afterwards, the vessel holding the mirror is positioned in the washing chamber

73
00:07:02,000 --> 00:07:06,000
where the old reflective coating of the mirror is washed off.

74
00:07:09,000 --> 00:07:17,000
The washing process begins and a giant, purpose-built sprayer arm rotates just above the surface of the mirror. 

75
00:07:17,000 --> 00:07:20,000
Ultra-pure water and chemicals are used. 

76
00:07:20,000 --> 00:07:27,000
Under the critical eye of the optical engineers the machinery does a flawless job and the operation proceeds smoothly. 

77
00:07:28,000 --> 00:07:33,000
In the next stage, acid is used to remove the old aluminium coating. 

78
00:07:33,000 --> 00:07:36,000
The real amber colour of the dish appears.

79
00:07:36,000 --> 00:07:42,000
The mirror is made of special ceramics that don’t deform under temperature changes.

80
00:07:43,000 --> 00:07:48,000
Again, the mirror is rinsed intensively to provide as clean a surface as possible. 

81
00:07:48,000 --> 00:07:54,000
Once done, all the liquid is pumped out and the mirror is ready for the vacuum chamber.

82
00:07:57,000 --> 00:08:01,000
The vacuum chamber lies next to the washing unit. 

83
00:08:05,000 --> 00:08:11,000
The mirror is placed in the chamber immediately after cleaning to avoid contamination with new pollutants. 

84
00:08:13,000 --> 00:08:17,000
The lower part of the vessel is lifted up and the chamber is closed. 

85
00:08:17,000 --> 00:08:24,000
The air can now be pumped out to establish a nearly perfect vacuum, necessary for recoating.

86
00:08:25,000 --> 00:08:29,000
Once the vacuum is established, the recoating can begin. 

87
00:08:29,000 --> 00:08:36,000
The optical engineers use an electrically stimulated plasma, for a molecular cleaning of the optical surface of the rotating mirror. 

88
00:08:36,000 --> 00:08:43,000
Then, individual particles of aluminium are deposited on the mirror in a process known as sputtering deposition. 

89
00:08:43,000 --> 00:08:45,000
This takes about half an hour. 

90
00:08:47,000 --> 00:08:53,000
Only 12 grams of aluminium are used to create the new coating for the roughly 50 square metres of the primary mirror, 

91
00:08:53,000 --> 00:08:56,000
and so the coating is only about 80 nanometres thick. 

92
00:09:00,000 --> 00:09:02,000
It’s really not a lot is it?

93
00:09:03,000 --> 00:09:09,000
Finally, the moment of truth has come: Will the quality of the new coating meet the high standards of the VLT?

94
00:09:11,000 --> 00:09:14,000
Recoating a mirror is always a tricky business:

95
00:09:14,000 --> 00:09:20,000
if the mirror isn’t thoroughly clean or if the vacuum chamber is contaminated then the coating will be flawed.

96
00:09:20,000 --> 00:09:24,000
Tension is high as the chamber opens and the mirror is brought out.

97
00:09:25,000 --> 00:09:29,000
A first visual inspection suggests that the recoating has succeeded. 

98
00:09:29,000 --> 00:09:37,000
But what really matters is how reflective the mirror is, so the percentage of light the mirror reflects and scatters is measured.

99
00:09:39,000 --> 00:09:45,000
The result confirms the high reflectivity of the mirror and the experts are fully satisfied.

100
00:09:46,000 --> 00:09:50,000
The recoating was successful and the mirror is all shiny and new again. 

101
00:09:50,000 --> 00:09:55,000
Our team is now ready to take the mirror back up the mountain and reinstall it at the telescope.

102
00:09:55,000 --> 00:09:59,000
The VLT will be back in full operation exactly on schedule

103
00:09:59,000 --> 00:10:02,000
to provide astronomers with a superb view of our Universe once more. 

104
00:10:03,000 --> 00:10:05,000
This is Dr J signing off for the ESOcast. 

105
00:10:05,000 --> 00:10:09,000
Join me again next time for another cosmic adventure.

106
00:10:09,000 --> 00:10:12,000
The Recoating Team

107
00:10:17,000 --> 00:10:20,000
ESOcast is produced by ESO, the European Southern Observatory. www.eso.org

108
00:10:20,000 --> 00:10:23,000
ESO, the European Southern Observatory, is the pre-eminent intergovernmental science and technology organisation in astronomy

109
00:10:23,000 --> 00:10:26,000
designing, constructing and operating the world's most advanced ground-based telescopes.

110
00:10:27,000 --> 00:10:30,000
Transcription by ESO ; translation by —

